Clamps

1000mL Dropping Funnel with Laboratory Support Stand - Includes Glass Dropping Funnel, 6 lb Metal Retort Base & Rod, Clamp with Bosshead

Convenient 4-piece set eliminates the need to piece together a setup in a laboratory or classroom setting Includes a 1000mL capacity cylindrical g...

View full details

CH0470ESTANDSET

10PK 3" Lab Mohr's Pinchcock Tubing Clamps

10 pack 3" Mohr's clip Made from nickel-plated brass Used in laboratories to hold latex tubing to stop water and effectively clamp off hoses and c...

View full details

CH0290BPK10

11 Piece Set - Rectangular Retort Stand, Rod, Bossheads, Clamps, and Rings - Eisco Labs

HIGH QUALITY || This laboratory set includes everything necessary to start a basic chemistry experimentation lab INCLUDED BOSSHEADS & RINGS ||...

View full details

INDLABSET

12 Piece Set - Complete Chemistry Starter Kit - Rectangular Retort Stand, Rod, Clamps, Rings, Stand, Tubing, Gauge, Bosshead & Bunsen Burner Set - Eisco Labs

HIGH QUALITY || This ultimate laboratory starter set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod ...

View full details

MTST7

12PK Lattice Support Clamps - Fits Rods Up To 12.5mm diameter - Eisco Labs

FITS 12.5mm RODS || Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH || Clamps are made of high q...

View full details

CH0664C

13 Piece Set - Complete Research Grade Lab Starter Kit - Includes Rod, Base, Tongs, Rings, Test Tube Stands, Clamps & More - Eisco Labs

RESEARCH QUALITY || This ultimate laboratory starter set includes a rod, base, tong, stand, clamp and more COMPLETE KIT || Test tube/lab instrumen...

View full details

LABKIT

2 Finger Spring Loaded Clamp, Connecting Rod - 2.75" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP04

2 Finger Spring Loaded Clamp, Swivel Bosshead - 2.75" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP04BH

2 Prong Burette Clamp on Stainless Steel Rod - 4.25" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP05

2 Prong Burette Clamp on Stainless Steel Rod - 4.3" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP08

2 Prong Burette Clamp on Swivel Bosshead - 4.25" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP05BH

2 Prong Burette Clamp on Swivel Bosshead - 4.3" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP08BH

2 Prong Double Adjustable Universal Clamp

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slipv...

View full details

CH0675A

2 Prong Double Adjustable Universal Clamp, Integral Boss Head, Non-Slip Vinyl Coated Rubber Jaws, 7.5"-8" Adjustable Length - Eisco Labs

2 Prong Adjustable Universal Clamp with an adjustable 7.5"-8" length This clamp with boss head is ideal for use with straight sides glassware appa...

View full details

CH0675B

2 Prong Single Adjustable Universal Clamp - Large

This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slip ...

View full details

CH0681A

2 Prong Single Adjustable Universal Clamp - Large, with integral bosshead

This clamp with bosshead is ideal for use with straight sides glassware and apparatus such as burettes, tubes & flask necks. The jaws are coate...

View full details

CH0681B

2-Prong Adjustable Clamp - Can Hold Objects of 8-30mm in Diameter - Integral Bosshead - Vinyl Coated, Nonslip Jaws - Eisco Labs

Two prong, adjustable clamp Integral bosshead Universal- clamp is ideal for use with straight sided glassware and apparatus such as burettes, tube...

View full details

CH0680A

3 Finger Adjustable Clamp on Stainless Steel Rod - 2.3" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP06

3 Finger Adjustable Clamp on Swivel Bosshead - 2.3" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP06BH

3 Finger Cork Lined Extension Clamp on Bosshead - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP09BH

3 Finger Cork Lined Extension Clamp on Rod - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP09

3 Finger Extension Clamp on Stainless Steel Rod - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP07

3 Finger Extension Clamp on Stainless Steel Rod - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP01

3 Finger Extension Clamp on Swivel Bosshead - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP01BH

3 Finger Extension Clamp on Swivel Bosshead - 3.4" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP07BH

3 Prong Double Adjustable Universal Clamp, Non-Slip Vinyl Coated Rubber Jaws, 10" Overall Length - Eisco Labs

3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glasswar...

View full details

CH0676A

3 Prong Double Adjustable Universal Clamp, with integral bosshead

These clamps are used to hold irregularly shaped items. They provide firm grip to most commonly used glassware items in the labs. The jaws are adju...

View full details

CH0676B

3 Prong Double Adjustable Universal Retort Clamp with Boss Head, 9" Long, 3.5" Maximum Opening - Eisco Labs

3 Prong Universal Retort Clamp with Boss Head. 9" total length. Jaws open 3.5" wide. Adjustable on both sides with thumbscrews. Commonly used to h...

View full details

CH0688NC

3" Lab Mohr's Pinchcock Tubing Clamp

3" Mohr's clip Made from nickel-plated brass Used in laboratories to hold latex tubing to stop water and effectively clamp off hoses and control t...

View full details

CH0290B

3-Finger Extension Clamp with PVC Coated Prongs & Swivel Bosshead

Die cast alloy construction is strong and corrosion-resistant WIDE JAWS || 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide rang...

View full details

CH0688

4 Piece Set - Rectangular Retort Stand, Rod, Clamp & Ring Set - 8"x5" Steel Base, 23.6" Stainless Steel Rod, 3" Steel Support Rings, 3-Pronged Coated Clamp - Eisco Labs

HIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...

View full details

MTST5

4 Piece Set - Rectangular Retort Stand, Rod, Clamp & Ring Set - 8"x5" Steel Base, 23.6" Stainless Steel Rod, 3" Steel Support Rings, 4-Pronged Cork-Lined Clamp - Eisco Labs

HIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...

View full details

MTST1

4 Piece Set - Rectangular Retort Stand, Rod, Clamp & Ring Set - 8"x5" Steel Base, 23.6" Stainless Steel Rod, 3" Steel Support Rings, 4-Pronged Cork-Lined Clamp - Eisco Labs

HIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...

View full details

MTST1-5

4 Prong, Cork Lined Clamp on Stainless Steel Rod - 4.1" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP02

4 Prong, Cork Lined Clamp on Swivel Bosshead - 4.1" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP02BH

4 Prong, Vinyl Coated Clamp on Swivel Bosshead - 4.1" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP03BH

4 Prong, Vinyl Coated Clamp, Stainless Steel Rod - 4.1" Max Opening

INDUSTRIAL / RESEARCH GRADE QUALITY || Clamps feature solid Zinc die cast construction. High grade, nontoxic. powder coating. Non-ferrous, rust fr...

View full details

PRCMP03

500mL Dropping Funnel with Laboratory Support Stand - Includes Glass Dropping Funnel, 3.75 lb Metal Retort Base & Rod, Clamp with Bosshead

Convenient 4-piece set eliminates the need to piece together a setup in a laboratory or classroom setting Includes a 500mL capacity cylindrical gl...

View full details

CH0470DSTANDSET

5PK 3" Lab Mohr's Pinchcock Tubing Clamps

5 pack 3" Mohr's clips Made from nickel-plated brass Used in laboratories to hold latex tubing to stop water and effectively clamp off hoses and c...

View full details

CH0290BPK5

5PK Burette/Test Tube Clamp with Bosshead - PVC Coated Round Jaws, Opens up to 45mm

Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"...

View full details

CH0688A-5

6 Piece Set - Rectangular Retort Stand, Rod, Clamp & Ring Set - 10"x9" Steel Base, 23.6" Stainless Steel Rod, 2 Steel Support Rings, 3-Pronged Dual Adjusting Clamp - Eisco Labs

HIGH QUALITY || This laboratory set includes retort base made of corrosion resistant, powder coated steel, a stainless steel rod featuring a 10mm ...

View full details

MTST6

67 Piece Set - Complete Research Grade Lab Starter Kit - Includes Beakers, Cylinders, Test Tubes, Burette, Tongs, Ring Stand, Tube Rack, Clamps, and More - Eisco Labs

RESEARCH QUALITY || This ultimate laboratory starter set includes beakers, cylinders, test tubes, burette, clips, clamps, tongs, racks, base, rod,...

View full details

ULTLABKIT

Atwood Machine Kit - Experiment Components Only - Useful in Studying Newton's Law - Atwood Machine, Right Angle Clamp, String Spool & Spring - (Base Not Included) - Visual Scientifics by Eisco

This kit includes components for the classic Atwood machine, useful in helping students apply Newton's Laws. Visual Scientifics Magnetic Base (PHV...

View full details

PTAWM

Burette Clamp - Double - Fits 10mm or 12.5mm Rods - Polypropylene Plastic

Holds rods of 10mm or 12.5mm diameter Interchangeable tapered wedge inserts are easy to swap out Spring loaded center jack Vice-like grip prevents...

View full details

CH0262B

Burette Clamp - Double, sheet metal

Sheet metal, die-pressed, with built-in boss head.To hold two burettes, sheet metal, die-pressed, with built-in boss head.

CH0254B

Burette Clamp - Single, Casted

Single burette clamp made from cast metal, includes a built in boss head. It can accommodate 1 burette up to 20 mm in diameter and can be mounted ...

View full details

CH0256A

Burette Clamp, with Built in Boss Head - Accommodates Single Burette of up to 20mm Dia. - Die Pressed Sheet Metal, Vinyl Covered Fingers - Eisco Labs (Discontinued)

Burette clamp with built in boss head Can accommodate burettes measuring up to 20mm (0.78") in diameter Can be mounted on rod measuring up to 10mm...

View full details

CH0254A

Burette/Test Tube Clamp with Bosshead - PVC Coated Round Jaws, Opens up to 45mm

Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"...

View full details

CH0688A