Lab Equipment & Supplies

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml micro centrifuge tubes. Moulded in Polycarbonate, these autoclavable...

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5 ml micro centrifuge tubes. Moulded in Polycarbonate, these autoclavable...

Racks are stack able even when loaded and have purpose designed label spaces on each side. 100 Places for 1.5 ml MCT's. These two-tier versatile ...

Wooden stand can hold up to 4 funnels Hole diameter is 1.5" Adjustable from 1" to 20" height Rod can rotate Adjustable funnel stand for use in the...

Durable, sturdy funnel rack made of quality hardwood Holds up to four funnels - Each hole accommodates funnels with stems measuring up to 16mm in ...

PREMIUM QUALITY || Test tube rack featuring a sturdy polypropylene construction that will stand up to the wear and tear of the lab. Comes in blue ...

16cm x 16cm x 16cm Test tube basket Autoclavable EISCO Test Tube Basket, Polypropylene, 16x16x16cm(1) Test tube basketThis test tube basket is aut...

14cm x 12cm x 11cm Test tube basket Autoclavable Includes: (1) Test tube basket This test tube basket is autoclavable, non-corrosive f...

Includes: (1) Test tube stand Polypropylene, round 12 place test tube stand has four 25 mm dia. holes and eight 19 mm dia. holes in its top plate,...

Funnel stand holds one funnel. Features a clamping screw to ensure easy movement when loose and sturdy placement when tightened. Height is easily ...

Funnel stand holds up to two funnels. Features a clamping screw to ensure easy movement when loose and sturdy placement when tightened. Height of ...

Includes: (1) Stand This polished wooden funnel and burette stand comes with clamping screws for adjusting the height. Rod is approx. 460 x 16 mm...

Autoclavable draining basket 40cm x 40cm x 11cm Includes: (1) Draining Basket This polypropylene draining basket is perfect for drying...

Includes: (1) Clamp Diecasted alloy clamp retort, cork lined jaws with bosshead which accommodates rods up to 15 mm dia. Jaw opening 90 mm. This c...

Die cast alloy construction is strong and corrosion-resistant WIDE JAWS || 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide rang...

Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"...

Wall Mounted Laboratory Draining Rack for any wall or flat surface. Rack measures 20 inches long and wide Features 48 pins with rubber caps to pre...

28 peg wall mounted drying / draining rack. Accessories to mount the rack are not included. The rack is vinyl coated metal to protect glassware. T...

Hold up to 32 objects at a time Stands upright or hangs on the wall (mounting hardware not included) 21.5" tall, 17.25" wide, 12" depth from the p...

Excellent option for post wash draining of tubes & bottles in the laboratory Each peg is 14 cm in length and can be added or removed as needed...

PVC coated with boss head. Overall length 27 cm. PVC coated with boss head. Overall length 27 cm.

PVC coated. Overall length 27 cm. PVC coated. Overall length 27 cm.

Cork lined jaws, which accepts articles upto 100 mm in dia. Cork lined jaws, which accepts articles upto 100 mm in diameter. Overall length 27 cm.

Jaws are longer and opening 100 mm. Overall length 25 cm. 3 Prong clamp, a design different than Cat. no. CH0684. Jaws are longer and opening 100 ...

PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. PVC coated diecast jaw, with clamping tommy-bar scre...

PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm

For beaker upto 5 ltr, casted alloy with other plated parts, with covered jaws, opening up to 8 cm. The horizontal rod is offset so that large vess...

Premium quality wooden rack designed to hold up to 6 test tubes vertically. Polished. Rack features 6 holes measuring 22mm in diameter. Measures 9....

Clamp is designed to hold irregularly shaped items. The three, vinyl coated prongs provide a firm grip. Jaws are adjustable on both sides with thum...

This jumbo size, universal clamp is designed to hold a variety of items. The two, vinyl coated jaws provide a firm grip and are adjustable on both ...

Premium quality test tube stand featuring a sturdy wood construction that will stand up to the wear and tear of the lab Rack holds test tubes vert...

New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 21 cm; Width - 13.5 cm; Weight - 1600 g

New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 16 cm; Width - 10 cm; Weight - 900 g

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 60cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 90cm rod m...

THREE ADJUSTABLE PANELS || Safety barrier with 3 adjustable panels. The barrier provides an additional layer of protection for interaction 4MM THI...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 100cm rod ...

Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...

Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with T-pin type screws

Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with metal thumb screw

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...

HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel - Features rubber strips to protect surfaces STAB...

Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Size...

HIGH QUALITY || T-shaped nesting support retort base made of chemical-resistant cast iron with a black coating STABILITY || The 10.5" long by 9" w...