Filters
Product by Subject
-
A-Shaped Retort Base & Rod Set - 7"x7" Base, 19.8" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of an A-shaped retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod mad...
View full detailsABSE12 -
A-Shaped Retort Base & Rod Set - 8"x8" Base, 19.8" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of an A-shaped retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod mad...
View full detailsSTDRDAB01 -
A-Shaped Retort Base & Rod Set - 8.5"x8.5" Base, 23.6" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of an A-shaped retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod mad...
View full detailsSTDRDAB02 -
A-Shaped Retort Base & Rod Set - 8.7"x8.7" Base, 23.6" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod -Eisco Labs
HIGH QUALITY || Rod and base set consisting of an A-shaped retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod mad...
View full detailsABSE12SPL -
Aluminum Lattice Rod, 12" (30cm) - Unthreaded, Round Shaft
Laboratory Aluminum Lattice Rod, 12"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an e...
View full detailsCH0658PLM3 -
Aluminum Lattice Rod, 23.5" (60cm) - Unthreaded, Round Shaft
Laboratory Aluminum Lattice Rod, 23.5"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an...
View full detailsCH0658PLM6 -
Aluminum Rod, 19.7" (50cm) - 10 x 1.5mm Thread
Laboratory Aluminum Rod, 19.7"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an experim...
View full detailsCH0658A -
Aluminum Rod, 23.6" (60cm) - 10 x 1.5mm Thread
Laboratory Aluminum Rod, 23.6"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an experim...
View full detailsCH0658B -
Aluminum Rod, 29.5" (75cm) - 10 x 1.5mm Thread
Laboratory Aluminum Rod, 29.5"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an experim...
View full detailsCH0658C -
Aluminum Rod, 39.5" (100cm) - 10 x 1.5mm Thread
Laboratory Aluminum Rod, 39.5"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an experim...
View full detailsCH0658D -
Aluminum Support Rod, 12" (30cm) - Unthreaded, Round Shaft
Laboratory Aluminum Support Rod, 12"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an e...
View full detailsCH0658PL12 -
Aluminum Support Rod, 48" (120cm) - Unthreaded, Round Shaft
Laboratory Aluminum Support Rod, 48"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an e...
View full detailsCH0658PL48 -
Base Retort Stand - Premium Heavy Duty, Cast Iron 16 cm
New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 16 cm; Width - 10 cm; Weight - 900 g
CH0654F -
Base Retort Stand - Premium Heavy Duty, Cast Iron 21 cm
New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 21 cm; Width - 13.5 cm; Weight - 1600 g
CH0654G -
Base Retort Stand Ÿ??AŸ?? Shape - Nesting Type, 0.95 kg, Side 18 cm
This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...
View full detailsCH0655E -
Base Retort Stand Ÿ??AŸ?? Shape - Nesting Type, 1.50 kg Side 22 cm
This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...
View full detailsCH0655F -
Base Retort Stand Ÿ??AŸ?? Shape - Nesting Type, 2.50 kg Side 28 cm
This range of ‘A’ bases are made in cast iron and can be nested in one another. Powder coated finish with 10 x 1.5 mm thread. Base Retort Stand ‘A...
View full detailsCH0655G -
Base Slotted
Cast metal, finished in acid resisting paint with jaws 40 mm height and fitted thumb screw. Cast metal, finished in acid resisting paint with jaw...
View full detailsCH0660 -
Boss Head - Aluminium
Aluminium die casted, holds rods at right angle with metal head thumbscrews can take rods up to 16 mm dia.
CH0664A -
Boss Head - Mini
Diecasted alloy, accepts rod upto 13 mm dia. For use with laboratory stand, diecasted alloy, accepts rod upto 13 mm diameter, which are secured wi...
View full detailsCH0662 -
Bosshead - Economy, with metal thumb screw
Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with metal thumb screw
CH0663BK -
Bosshead - Economy, with T-pin type screws
Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with T-pin type screws
CH0663ECO -
Bosshead, Heavy Duty - High Torsional Strength, Screw Adjustable
INDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade metal alloy, finished with non toxic powder coating. Non-ferrous, rust free & long...
View full detailsPRBH03 -
Bosshead, Mini - High Torsional Strength, Screw Adjustable
INDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade Zinc Alloy, finished with non toxic powder coating. Two stainless steel thumb screws. ...
View full detailsPRBH02 -
Bosshead, Right Angle - High Torsional Strength, Screw Adjustable
INDUSTRIAL / RESEARCH GRADE QUALITY || Made from high grade Zinc Alloy, finished with non toxic powder coating. Two stainless steel thumb screws. ...
View full detailsPRBH01 -
Burette Clamp - Double, sheet metal
Sheet metal, die-pressed, with built-in boss head.To hold two burettes, sheet metal, die-pressed, with built-in boss head.
CH0254B -
Burette Clamp - Single, Casted
Single burette clamp made from cast metal, includes a built in boss head. It can accommodate 1 burette up to 20 mm in diameter and can be mounted ...
View full detailsCH0256A -
Burette Clamp, with Built in Boss Head - Accommodates Single Burette of up to 20mm Dia. - Die Pressed Sheet Metal, Vinyl Covered Fingers - Eisco Labs (Discontinued)
Burette clamp with built in boss head Can accommodate burettes measuring up to 20mm (0.78") in diameter Can be mounted on rod measuring up to 10mm...
View full detailsCH0254A -
Burette/Test Tube Clamp with Bosshead - PVC Coated Round Jaws, Opens up to 45mm
Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"...
View full detailsCH0688A -
Cast Iron Ring, 5.75" (5.125" Inner Dia.) - Open Boss Head Clamp, with Thumb Screw - Eisco Labs
5.75" cast iron ring with boss head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from boss hea...
View full detailsCH0674D -
Channel Base
For holding flat objects upto 18 mm thick. Size 10 cm length and 8 cm width. Cast metal, finished in acid resisting paint. Fitted with thumb screw...
View full detailsCH0661 -
Circular Laboratory Tripod Stand, 12 inches tall, Plated Mild Steel - Eisco Labs
12" tall circular tripod stand Made from plated mild steel Inner diameter: 2.5" Legs measure 5.5" apart Great for any science or home laboratory 1...
View full detailsCH0647B01 -
Clamp Beaker (Discontinued)
For beaker upto 5 ltr, casted alloy with other plated parts, with covered jaws, opening up to 8 cm. The horizontal rod is offset so that large vess...
View full detailsCH0685 -
Clamp Retort - 3 Prong, Black Powder coated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25...
View full detailsCH0684BLK -
Clamp Retort - 3 Prong, Chrome plated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm
CH0684A -
Clamp Retort - 3 Prong, Powder coated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. PVC coated diecast jaw, with clamping tommy-bar scre...
View full detailsCH0684 -
Clamp Retort - 4 Prong, Black Powder plated
Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...
View full detailsCH0682BLK -
Clamp Retort - 4 Prong, Chrome plated
Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...
View full detailsCH0682A -
Clamp Retort 3 Prong - Large
Jaws are longer and opening 100 mm. Overall length 25 cm. 3 Prong clamp, a design different than Cat. no. CH0684. Jaws are longer and opening 100 ...
View full detailsCH0684B -
Clamp Universal - Cork lined
Cork lined jaws, which accepts articles upto 100 mm in dia. Cork lined jaws, which accepts articles upto 100 mm in diameter. Overall length 27 cm.
CH0684C -
Clamp Universal - PVC coated
PVC coated. Overall length 27 cm. PVC coated. Overall length 27 cm.
CH0684D -
Clamp Universal - PVC coated with boss head
PVC coated with boss head. Overall length 27 cm. PVC coated with boss head. Overall length 27 cm.
CH0684E -
Clamp, 8 Inch with Chain, 19 Inch - With Stainless Steel Rod - Vinyl-Coated
INDUSTRIAL / RESEARCH GRADE QUALITY || Clamp features a solid Zinc die cast construction and a high grade, nontoxic, powder coating - Non-ferrous,...
View full detailsPRCMP21 -
Double Threaded Base Retort Stand - Sheet Metal Deluxe 160x100mm
Steel base with two tapped holes. Measures 16cm in length, 10cm in width and weighs 750g. Finished in blue color, and fitted with rubber feet for e...
View full detailsCH196001 -
Double Threaded Base Retort Stand - Sheet Metal Deluxe 200x125mm
Steel base with two tapped holes. Measures 20cm in length, 12.5cm in width and weighs 1200g. Finished in blue color, and fitted with rubber feet fo...
View full detailsCH196002 -
Double Threaded Base Retort Stand - Sheet Metal Deluxe 250x160mm
Steel base with two tapped holes. Measures 25cm in length, 16cm in width and weighs 1800g. Finished in blue color, and fitted with rubber feet for ...
View full detailsCH196003 -
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish, rods up to 16mm Includes: (1) Boss head For use with laboratory stands, this popular boss...
View full detailsCH0663A -
EISCO Boss Head, Die Cast Alloy, up to 16mm Rods
EISCO Boss Head, Die Cast Alloy, rods up to 16mm Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die c...
View full detailsCH0663B