Modern Physics

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 10mH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 1 H. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 1mH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 22µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 6.8µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 68µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Demonstrate inertia in a simple experiment Perfect for middle, high school or even basic college physics Stand with a receptacle for a ball at the...

Consists of 6 metal rods of different materials having equal lenghts mounted in corks with their lower ends in a four legged tank of 170mm high. C...

Panel mounted, spin free with 4 mm sockets.Panel mounted, spin free with 4 mm sockets. Available in Black / Red/Yellow colours

Mounted with captive insulated head, with 4 mm socket , nuts and washers. Black Panel mounted with captive insulated head, with 4 mm socket , nuts...

Mounted with captive insulated head, with 4 mm socket , nuts and washers. Red Panel mounted with captive insulated head, with 4 mm socket , nuts a...

These Universal Digital Logic Gate modules are suitable to verify the digital logics andverification of the truth table. All the relevants digital ...

Adjustable Iris Diaphragm made of quality black metal 3" (75mm) diameter, maximum inner diameter of 1.25" (30mm). 2.5" rod, 5" total length Use...

Small Ironclad Electromagnet Powered by one (1) D cell battery Comes with large hooks Lifts up to 80 lbs. Batteries not included Includes: (1) ...

1000 Grams (2.2 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 3.5 x 3 x 1.25 inches Within international toler...

100 Grams (.22 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 1.6 x 1.5 x .5 inches Within international tolera...

2000 Grams (4.4 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 4.5 x 3.9 x 1.6 inches Within international tole...

200 Grams (.44 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 2 x 1.75 x .75 inches Within international tolera...

5000 Grams (11 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 5.5 x 4.6 x 2.4 inches Within international toler...

500 Grams (1.1 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 2.75 x 2.5 x 1 inches Within international tolera...

50 Grams (.11 Lbs.) Solid iron weight, painted black Lifting ring for easy mobility and hanging 1.1 x 1 x .5 inches Within international tolerance...

Body of any irregular mounted on ball bearing positioned in its centreof gravity, perforated with 2 mm holes at 1 cm intervals on the wholesurface....

With insulatedhandle, plated brass contact with 4 mm socket terminals.For use with wheatstone bridge and potentiometer, with insulatedhandle, plate...

This Jolly's bulb is comprised of a hollow sphere, directly attached to a pressure gauge Made of high quality stainless steel Useful for exploring...

Palm-sized, hollow glass ball with a manometer connected to it for demonstrating change of pressure in a closed volume of air when heated or cooled...

Jolly’s PhotometerJolly’s Photometer

Mounted upon wooden base fitted on standA meter for measuring the power consumption of any mains operated appliance. Rotating disc and digital read...

A single phase 2 wire disc type meter for low voltage working and calibrated in joules. Mounted on a wooden stand and enclosed in a transparent cas...

Joule's Calorimeter, useful for conducting the electrical method of determining the specific heat capacity of a liquid. Comprises of a nickel plate...

To study motion and behavior of molecules in gases.An electric motor running at 4 - 12 V DC vibrates small platform inside transparent tube so that...

Consists of irregular shaped body, a system for measurement of distances, 4 pulleys on magnet, one roll of thread and one magnet on hook. The sha...

Rigid Steel knife edges used a s a mass hanger. Clamps firmly to meter ruler by a screw. Edges properly align with one edge of opening exposing ...

Supplied in ABS box fitted with 4 mm sockets. Supplied in ABS box of size 95 x 70 x 30 mm, fitted with 4 mm sockets.

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Do...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Do...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Si...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Si...

Comprising a glass tube80 cm long and 32 mm in dia. at one end is a tightly fitting but adjustable cork piston fitted to a metal rod 100 cm long an...

Dual scale hydrometer for measuring the relative density in heavy liquids. Shot loaded. Range: 1.000 to 1.500 x 0.010 11.25" long and 0.6" diamete...

Dual scale hydrometer for measuring the relative density in heavy liquids. Loaded with iron shot to float upright Range: 1.000 to 2.000 x 0.010 ...

Apparatus Contains: (1) Thick Wall Aluminum can - Approximately 1 L with nozzle for steam outlet, (1) AL Sample carrier, (1) Spring Handle, (1) Tr...

A 12V, 21W white B.C. pygmy lamp in a conical lamp house. Mounted on a 6 mm metal rod. Supplied complete with 1.5 m of twin flex.

Conical Lamp house. 240V 15W. Mounted on a 6 mm metal rod. A 240V 15W white B.C. pygmy lamp in a conical lamp house. Mounted on a 6 mm metal rod. S...

These Simple Circuit modules can be used to construct simple circuits of the type normally implemented on, for example a Worcester Circuit Board. V...

Fitted with MES type bulb holder and terminals.Lamp Holder fitted with MES type bulb holder and terminals.

Lamp House SpareLamp House Spare

Made of sheet metal. Supplied with clamp, rod & metal base. For sodium lamp, made of sheet metal, adjustable to any angle. Supplied with clamp...

Base is fitted with metal rod which has fixing point for the conductor linked to a flexible wire attached to the socket of the platform. Magnet is ...