Filters
Modern Physics
-
Thermopile - Copper-iron
With four copper and four iron wires approximately 130 mm long, twisted together to form seven junctions, four on one side, three on the other. Wit...
View full detailsPH0428 -
Thiele Tube
Diameter of main tube is 25 mm Length 150 mm Supplied in pack of 2 tubes. For determining the melting point of organic compounds. Diameter of main ...
View full detailsPH0409 -
Ticker Tape Holder
Stand with 10mm statinless steel mounted rod to hold tape rolls. A specially designed stand to hold our ticket tape rolls, with easy possible, it ...
View full detailsPH0353D -
Ticker Tape Timer Device - For Measuring Speed & Acceleration - Includes Ticker Tape, Carbon Disks, Instructions - Eisco Labs
Measures speed and accelerations of objects Produces up to 50-60 dots per second Transit time is calculated by counting the number of dots in a m...
View full detailsPH0353A -
Ticker Timer Tape - 164' (50 Meters) Of Paper Tape
50 meters of paper tape To be used with Ticker timers ( PH0353A) Replacement Paper tape to be used with Ticker timers ( PH0353A) 50 meters per roll
PH0353B -
Tool Kit
Set of all important tools.Consists of 6” slip joint pliers, 6.5” long nose pliers, 6” adjustable wrench, screwdriver set featuring slotted bits, p...
View full detailsPH1072P -
Top Spinning Base, 3" (75mm) Surface - Double Concave - Optical Glass Lens, 200mm Focal Length - Optically True - Ground, Beveled Edges - Eisco Labs
DOUBLE CONCAVE || Highly polished, double concave lens SPHERICAL || Lens measures 3" (75mm) in diameter and approximately 12mm thick 200MM FOCAL L...
View full detailsFSC1029 -
Trajectory Study Apparatus, Two Dimensional - Explore Projectile Motion, Trajectory Path, Velocity and Acceleration - Eisco Labs
Complete Trajectory Study Apparatus Kit This experiment is used to teach students about projectile motion by plotting the trajectory path of a ste...
View full detailsSTRJ -
Transducer
Similar to the transmitter and receiver, but containing only a transducer cell. Designed to be connected in parallel. Similar to the transmitter a...
View full detailsPH0733C -
Transformer
Suitable for 35 watts Sodium Lamp. Operates on 220 volts AC. Transformers suitable for 35 watts Sodium Lamp. Operates on 220volts AC.
PH0636 -
Transformer Accessories Kit, 4 Pieces - Explore Lenz Law and Induction Heating - Eisco Labs
4 Piece Transformer Accessories Kit Includes Single ring with handle, 2 coil rings (one complete, one with gap), and 6 turn thick coil with handle...
View full detailsPH0849AK1 -
Transmission Line Appts/Power Grid Simulation
AlThis apparatus demostrates safely and effectively why electricity is stepped up to 1,000s of volts when transported over large distances. Measure...
View full detailsTMLNJUP -
Trolley Runway
Made of wood, Size 1.5 x 0.3 meters. Designed to provide a smooth flat easily inclinable surface for dynamic experiments using trolleys. With wood...
View full detailsPH0352 -
Tuning Fork - Electrically Maintained
Mounted on sturdy streamlined base. Steel forks Prong is 10 x 25 x 300 mmOn sturdy streamlined base with provision for horizontal or vertical use. ...
View full detailsPH0748 -
Tuning Fork - Heavy- Set of 13
A heavier duty set of tuning forks made of steel and chrome plated. The set is similar to PH0744A but the forks are heavier and made from thicker s...
View full detailsPH0744A-JU -
Tuning Fork - Standing
Light weight tuning fork, capable of standing upright. Light weight tuning forks, capable of standing upright, with specially wide sound irradiati...
View full detailsPH0745 -
Tuning Fork Electric
Heavy-duty electric tuning fork. An electromagnet drives the fork to a sustained frequency of 80Hz. The tuning fork assembly and binding posts are ...
View full detailsPH0746 -
Tuning Fork on Resonance Box - Steel
Comprises fourSteel forks mounted on a common box and having frequency of C (256), E (320), G (384), C (512). Complete with hammer. For demonstrat...
View full detailsPH0740A -
Tuning Fork, 256Hz - Premium Quality - Middle C - Plain Shanks - Aluminum - Eisco Labs
MIDDLE C || Tuning fork scientifically tuned to the absolute concert pitch middle C (256 Hertz) TWO-PRONGED || A two-pronged plain shank fork used...
View full detailsPH0737A -
Tuning Fork, 426Hz - A Note - Plain Shanks, Made of Premium Quality Aluminum - Designed for Physics Experimentation - Eisco Labs
Single tuning fork made of premium quality aluminum 426Hz, +/-5% of stated frequency A note Plain shanks Perfect for physics experimentation and s...
View full detailsPH0737F -
Tuning Fork, 512Hz - C Note - Plain Shanks, Made of Premium Quality Aluminum - Designed for Physics Experimentation - Eisco Labs
Single tuning fork made of premium quality aluminum 512Hz, +/-5% of stated frequency C note Plain shanks Perfect for physics experimentation and s...
View full detailsPH0737H -
Tuning Fork, 512Hz Frequency - Note "C" - Aluminum with Round Stem
Used as an acoustic resonator - Resonates at the specific constant pitch after striking against a surface - Emits a pure musical tone once the hig...
View full detailsPH0737P -
Tuning Forks Set of 8 Steel supplied in 6.5" x 4.5" Plastic case
Set of 8 Steel supplied in plastic case. Frequency : C (256), D (288), E (320), F (341), G (384), A (426), B (480), C (512) High Quality Tuning fo...
View full detailsPH0738C -
Tuning Forks Sets
Best quality, Set of 8, Aluminium, nickel-plated, plain shanks.Best quality nickel-plated, plain shanks, with frequency marked, C (256), D (288), E...
View full detailsPH0738D -
Tuning Forks, Frequency 256Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 256Hz
PH0737I -
Tuning Forks, Frequency 2886Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 288Hz
PH0737J -
Tuning Forks, Frequency 288Hz - Aluminum - Eisco Labs
Plain shanks. Best quality aluminium. Plain shanks. Best quality aluminium.Frequency 288Hz
PH0737B -
Tuning Forks, Frequency 320Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 320Hz
PH0737K -
Tuning Forks, Frequency 341Hz - Aluminum - Eisco Labs
Plain shanks. Best quality aluminium. Plain shanks. Best quality aluminium.Frequency 341Hz
PH0737D -
Tuning Forks, Frequency 341Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 341Hz
PH0737L -
Tuning Forks, Frequency 384Hz - Aluminum - Eisco Labs
Plain shanks. Best quality aluminium. Plain shanks. Best quality aluminium.Frequency 384Hz
PH0737E -
Tuning Forks, Frequency 384Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 384Hz
PH0737M -
Tuning Forks, Frequency 426Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 426Hz
PH0737N -
Tuning Forks, Frequency 480Hz - Aluminum - Eisco Labs
Plain shanks. Best quality aluminium. Plain shanks. Best quality aluminiumFrequency 480Hz.
PH0737G -
Tuning Forks, Frequency 480Hz - Aluminum with Round Stem - Eisco Labs
Plain shanks with round Stem, Superior quality aluminium. Same as above but with round Stem, Superior quality Frequency 480Hz
PH0737O -
Turbojet Engine (Gas Turbine) Model - Eisco Labs
Hand painted model 17" long and approximately 6" tall This section cut model is constructed of light and strong metal showing air intake, axial fl...
View full detailsPH0494 -
Turbojet Gas Engine Desktop Model - 19"x9" Metal Base, 16" Turbojet Length - Eisco Labs
Desktop model turbojet measuring 20"x9" at the base Beautifully hand-painted by artisans, this model is metal with the exception of the rotors, wh...
View full detailsPH0494H -
Two Speed Car
Battery Operated, 2 Speed Dynamics cart for study of motion. Compatible with our aluminum dynamics track.
PH0343TWC -
Two Way Copper Plug Key Switch, 4mm Terminals with 2 Removable Plugs - Eisco Labs
2-Way Copper Plug Key Switch Includes two removable plugs with plastic guards Fitted to a sturdy base Three, 4mm terminals Useful in classroom phy...
View full detailsPH0990A -
Two-stroke Diesel Engine Model - Eisco Labs
EISCO Two-stroke Diesel Engine Model(1) ModelThis model shows the internal structure and operating principles of an air cooled two-stroke engine. A...
View full detailsPH0490 -
U-shape Magnets - ALNICO
Poles 45 mm apart with hole. Supplied in cardboard boxes.Distance across the Poles 45 mm with hole. Supplied in cardboard boxes.
PH0794A -
U-shape Magnets - ALNICO
Poles 45 mm apart with hole. Supplied in cardboard boxes.Distance across the Poles 45 mm without hole. Supplied in cardboard boxes.
PH0794B -
U-shape Magnets - ALNICO
With keepers.Supplied in card board boxes. With keepers. Size 37 x 13 x 10mm Pole Gap 18 mmSupplied in card board boxes.
PH0795A -
U-shape Magnets - ALNICO
With keepers.Supplied in card board boxes. With keepers. Size 50 x 13 x 10 mm Pole Gap 18 mmSupplied in card board boxes.
PH0795B -
U-shape Magnets - ALNICO
With keepers.Supplied in card board boxes. With keepers. Size 75 x 13 x 10 mm Pole Gap 18 mmSupplied in card board boxes.
PH0795C -
U-shape Magnets - ALNICO
With keepers.Supplied in card board boxes. With keepers. Size 50 x 10 x 9 mm Pole Gap 18 mmSupplied in card board boxes.
PH0795E -
U-shape Magnets - ALNICO
With keepers.Supplied in card board boxes. With keepers. Size 100 x 10 x 9 mm Pole Gap 18 mmSupplied in card board boxes.
PH0795G -
U-shape Magnets - ALNICO
Poles Indicated. With keepers. With keepers. Poles Indicated. Size 115 x 20 x 8 mmSupplied in card board boxes.
PH0795H