Newest Products

These Simple Circuit modules can be used to construct simple circuits of the type normally implemented on, for example a Worcester Circuit Board. V...

Mounted on 90 x 90 x 30 mm base.With photo-sensitive resistor mounted on 90 x 90 x 30 mm base.Shows that resistance is inversely proportional to li...

These Simple Circuit modules can be used to construct simple circuits of the type normally implemented on, for example a Worcester Circuit Board. V...

These Simple Circuit modules can be used to construct simple circuits of the type normally implemented on, for example a Worcester Circuit Board. V...

This unit demonstrates the concept of a LED (Light Emitting Diode) within a circuit. Can be used inline with other components of Eisco Series PH10...

Consisting of glass container, zinc cylindrical electrode and bonded electrode, graphite and manganese dioxide consisting of porous vessel, carbon ...

Charged porous pot 150 x 60 mm, with terminal having e.m.f. 1.5 volts and zinc rod 12.5 mm diameter in rectangular polythene jar. Charged porous p...

Fitted with MES type bulb holder and terminals.Lamp Holder fitted with MES type bulb holder and terminals.

Made of hard plastic with one B22 socket and two 4mm banana plug terminals. Can be used inline with other components of Eisco Series PH1029 Accept...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Si...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Si...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Do...

Durable plastic base knife switches that stand up during tough student use. Poles & knives are made of brass for good electrical connections.Do...

With insulatedhandle, plated brass contact with 4 mm socket terminals.For use with wheatstone bridge and potentiometer, with insulatedhandle, plate...

Mounted with captive insulated head, with 4 mm socket , nuts and washers. Red Panel mounted with captive insulated head, with 4 mm socket , nuts a...

Mounted with captive insulated head, with 4 mm socket , nuts and washers. Black Panel mounted with captive insulated head, with 4 mm socket , nuts...

Panel mounted, spin free with 4 mm sockets.Panel mounted, spin free with 4 mm sockets. Available in Black / Red/Yellow colours

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 1 H. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 100mH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 10mH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 1mH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 100.0µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 68µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 22µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 10µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 6.8µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

Sturdy epoxy-molded axial inductors having tolerance of +10%.Value 1.0µH. Sturdy epoxy-molded axial inductors having tolerance of +10%.

50mm Spark Induction Coil Includes Coil, 2 Spark Rods, Shaker, Reversing Switch, On/Off Button and Power Sockets Provides very high voltages (seve...

30mm Spark Induction Coil Includes Coil, and 2 pointer electrodes Ideal for use with vacuum tubes, eudiometers etc. Fully adjustable vibrator syst...

100mm Spark Induction Coil Includes Coil, and 2 pointer electrodes Ideal for use with vacuum tubes, eudiometers etc. Fully adjustable vibrator sys...

This product has been improved and can now be found as part number: PH1168E

Mounted on transparent base, with 4 mm colour coded sockets. Mounted on transparent base, with 4 mm colour coded sockets, with circuit diagram pri...

DC Galvanometer, useful for electrical current detection. Fully enclosed, clear acrylic front cover. 20 - 0 - 100 uA This galvanometer can be conv...

5mm x 20mm fuse Clear transparent glass to see if fuse wire is broken 500 mA 250v Quick Blow type of fuse 5mm x 20mm fuse. Clear transparent glass...

5mm x 20mm fuse Clear transparent glass to see if fuse wire is broken 5A 250v Quick Blow type of fuse 5mm x 20mm fuse. Clear transparent glass to ...

5mm x 20mm fuse Clear transparent glass to see if fuse wire is broken 3A 250v Quick Blow type of fuse 5mm x 20mm fuse. Clear transparent glass to ...

5mm x 20mm fuse Clear transparent glass to see if fuse wire is broken 2A 250v Quick Blow type of fuse 5mm x 20mm fuse. Clear transparent glass to ...

5mm x 20mm fuse Clear transparent glass to see if fuse wire is broken 1A 250v Quick Blow type of fuse 5mm x 20mm fuse. Clear transparent glass to ...

Suitable for flash lamps, spotlights and panel lamps etc. Round, 12 Volts with M.E.S. cap, suitable for flash lamps, spotlights and panel lamps et...

Size E10 Screw Base For use with basic circuit kits Works with flash lamps, spot lamps and panel lamps Pack of 10 Volts with M.E.S. cap Flash Lamp...

Pack of 10 miniature, round light bulbs with screw base Voltage: 4.5V, Light Color: Warm Yellow, Thread: E10 Tungsten filament bulbs made of glass...

Size E10 Screw Base For use with basic circuit kits Works with flash lamps, spot lamps and panel lamps Pack of 10 3.5 Volts with M.E.S. cap Flash ...

Size E10 Screw Base For use with basic circuit kits Works with flash lamps, spot lamps and panel lamps Pack of 10 Flash Lamp Bulb - 1.5 Volts with...

2.2 V, 0.25 A, lens ended, M.E.S. Cap., Pk of 10 2.2 V, 0.25 A, lens ended, M.E.S. Cap. Pack of Ten.

Supplied in ABS box fitted with 4 mm sockets.Supplied in ABS box of size 95 x 70 x 30 mm, fitted with 4 mm sockets.

Supplied in ABS box fitted with 4 mm sockets.Supplied in ABS box of size 95 x 70 x 30 mm, fitted with 4 mm sockets.

Supplied in ABS box fitted with 4 mm sockets.Supplied in ABS box of size 95 x 70 x 30 mm, fitted with 4 mm sockets.

Supplied in ABS box fitted with 4 mm sockets.Supplied in ABS box of size 95 x 70 x 30 mm, fitted with 4 mm sockets.