Newest Products

Height 20 cm and length of side 12.5 cm. Stainless Steel, height 20 cm and length of side 12.5 cm.

Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs. Length of side 15cm, height 21cm.

Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs. Length of side 12cm, height 21cm.

Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs.OD 15cm, height 21cm.

Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs.OD 12cm, height 21cm.

Height 110 mm inner dia. 95 mm. Used with spirit lamps. Sheet top, black colour. Height 110 mm inner dia. 95 mm. Used with spirit lamps. Supplied...

HIGH QUALITY || T-shaped nesting support retort base made of chemical-resistant cast iron with a black coating STABILITY || The 10.5" long by 9" w...

HIGH QUALITY || T-shaped nesting support retort base made of chemical-resistant cast iron with a black coating STABILITY || The 8.5" long by 7.5" ...

High performance, jumbo sized, swivel clamp holder made of die-casted metal. This brilliant clamp allows you to tilt clamps at any angle in paralle...

HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod m...

HIGH QUALITY || Stump-shaped support retort base made of chemical-resistant cast iron with a black coating STABILITY || It's base is 2.3" wide and...

HIGH QUALITY || 75cm rod made of high quality steel STABILITY || Rod measures 29.5" tall and 12mm in diameter- Provides superb stability for exper...

HIGH QUALITY || 60cm rod made of high quality steel STABILITY || Rod measures 23.6" tall and 12mm in diameter- Provides superb stability for exper...

HIGH QUALITY || 50cm rod made of high quality steel STABILITY || Rod measures 19.8" tall and 12mm in diameter- Provides superb stability for exper...

HIGH QUALITY || 100cm rod made of high quality steel STABILITY || Rod measures 39.5" tall and 12mm in diameter- Provides superb stability for expe...

Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 80mm, height 210mm

Stainless Steel, polished, circular, with base Stainless Steel, polished, height 22 cm and inner dia 6.5 cm.

Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 120mm, height 210mm

Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 100mm, height 210mm

Made from chrome-plated steel wire that evenly disperses heat Heavy gauge wire mesh screen and stable base easily supports heavy glassware and cer...

HIGH QUALITY || 75cm rod made of high quality stainless steel STABILITY || Rod measures 29.5" tall and 12mm in diameter- Provides superb stability...

HIGH QUALITY || 60cm rod made of high quality stainless steel STABILITY || Rod measures 23.6" tall and 12mm in diameter - Provides superb stabilit...

HIGH QUALITY || 50cm rod made of high quality stainless steel STABILITY || Rod measures 19.8" tall and 12mm in diameter - Provides superb stabilit...

HIGH QUALITY || 100cm rod made of high quality stainless steel STABILITY || Rod measures 39.5" tall and 12mm in diameter- Provides superb stabilit...

Steel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cmSteel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cm in length, finished in grey / ...

Made of plated mild steel Inner diameter is 7.5 cm Ring and rod are integrated with boss head clamp From vertical rod connecting point to end of r...

UPC: 849230027704 DURABLE SUPPORT RING || Made of plated mild steel, this 10cm ID ring clamp with an integrated boss head provides strong, reliabl...

Outside diameter of ring 2.5" - Plated mild steel Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter wi...

Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3" Stem measures 5.5" in length Rod diameter measure 0.25" Total...

Closed Retort Ring made from plated mild steel Inner diameter of ring measures 2" Stem measures 5.5" in length Rod diameter measure 0.25" Total...

Closed Retort Ring made from plated mild steel Inner diameter of ring measures 5.9" Rod diameter measure 0.25" Total length measures 12" Closed...

Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3.9" Stem measures 5.5" in length Total length measures 10" Closed ...

RESEARCH QUALITY || This ultimate laboratory starter set includes a rod, base, tong, stand, clamp and more COMPLETE KIT || Test tube/lab instrumen...

FITS 12.5mm RODS || Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH || Clamps are made of high q...

Strong, stable support for lab equipment 6" by 5" area Maximum height is 9 5/8", minimum is 2 1/2" Heavy duty - maximum stable load is 55lbs Powde...

EXTENDABLE || Adjustable and reversible lab jack with stainless steel operating screw and 10mm tapped hole for accepting retort rod - Easy, fluid ...

Durable powder coated steel laboratory scissor jack, with 25kg (55 lbs.) maximum load Plate size 7.75 in x 7.75 in Platform minimum height is 2.5 ...

Drop forgedDrop forged. Length 250 mm

Drop Forged Steel G-Clamp 200mm (8") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...

Drop-forged steel clamp capable of opening 150mm (approximately 6") Threaded steel screw with swivel pads grips material more tightly Sliding T-ba...

Drop forgedDrop forged. Length 125 mm

Drop Forged Steel G-Clamp 100mm (4") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...

Drop forgedDrop forged. Length 75 mm

Drop forgedDrop forged. Length 50 mm

Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 60mm in width 1" cork lined jaws Perfect for test tubes, burettes, ...

Includes: (1) Clamp Two prong, diecasted with other parts of plated brass, accepts articles from 15-60mm diameter actuated by nickel plated brass ...

Includes: (1) Thermometer Clamp Adjustable 360° jaw rotation. For attaching to support rods up to 16 mm in diameter. Will accommodates thermometer...

Holds items 110mm from the support rod Adjustable and locks at any angle Includes: (1) Suspension Clamp Used to suspend a thermometer ...