Skip to content

Electricity & Magnetism

Rheostats Extended Range - EISCO

An extended range of rheostats differing in resistance and dimensions from the standard range but otherwise having the same specification as Cat. N...

View full details
PH1152F

Rheostats Extended Range - EISCO

An extended range of rheostats differing in resistance and dimensions from the standard range but otherwise having the same specification as Cat. N...

View full details
PH1152E

Rheostats Extended Range - EISCO

An extended range of rheostats differing in resistance and dimensions from the standard range but otherwise having the same specification as Cat. N...

View full details
PH1152D

Rheostats Extended Range - EISCO

An extended range of rheostats differing in resistance and dimensions from the standard range but otherwise having the same specification as Cat. N...

View full details
PH1152C

Rheostats Extended Range - EISCO

An extended range of rheostats differing in resistance and dimensions from the standard range but otherwise having the same specification as Cat. N...

View full details
PH1152B

Rheostat - Standard, Resistance 1325 Ohms, Maximum Current 0.5 Amp - Eisco Labs

Wound with heavily oxidized constantan wire on a vitreous enameled steel tube. Tube is supported on robust die cast end stands Resistance 1325 Ohm...

View full details
PH1150I

Eisco Labs Rheostats - Standard, Resistance 8.5 Ohms, Max. Current 5 Amp.

Rheostat - Standard, Resistance 8.5 Ohms, Max. Current 5 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitr...

View full details
PH1150G

Rheostat - Standard Resistance, 1600 Ohms, Maximum Current 0.3 Amp - Eisco Labs

1600 Ohms, Maximum current: 0.3 Amp Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitreous enameled steel tub...

View full details
PH1150E

Eisco Labs Rheostats - Standard, Resistance 135 Ohms, Max. Current 1.4 Amp.

Rheostat - Standard, Resistance 135Ohms, Max. Current 1.4 amp Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a v...

View full details
PH1150D

Rheostats - Standard

Rheostat is wound with heavily oxidised constantan wire on a vitreous enamelled steel tube. The tube is supported on robust diecast end stands and ...

View full details
PH1150B

Eisco Labs Rheostat- Standard, Resistance 4.5 Ohms, Max. Current 9 A

Rheostat- Standard, Resistance 4.5 Ohms, Max. Current 9 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitre...

View full details
PH1150L

Eisco Labs Rheostat - Standard, Resistance 37 Ohms, Max. Current 3.2

Rheostat - Standard, Resistance 37 Ohms, Max. Current 3.2 Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitre...

View full details
PH1150K

Eisco Labs Rheostat - Standard, Resistance 300 Ohms, Max. Current 0.9 A

Rheostat - Standard, Resistance 300 Ohms, Max. Current 0.9 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vi...

View full details
PH1150C

Eisco Labs Rheostat - Standard, Resistance 2.5 Ohms, Max. Current 9 A

Rheostat - Standard, Resistance 2.5 Ohms, Max. Current 9 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitr...

View full details
PH1150H

Eisco Labs Rheostat - Standard, Resistance 1600 Ohms, Max. Current 0.3 A

Rheostat - Standard, Resistance 1600 Ohms, Max. Current 0.3 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a v...

View full details
PH1150A

Eisco Labs Rheostat - Standard, Resistance 16 Ohms, Max. Current 4 A

Rheostat - Standard, Resistance 16 Ohms, Max. Current 4 A Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitre...

View full details
PH1150F

Rheostat - Air Cooled

Useful for a variety of lab. demonstrations. These rheostats provide a variable resistance in electrical circuits. Oxidized constantan wire is woun...

View full details
PH1151F

Rheostat - Air Cooled

Useful for a variety of lab. demonstrations. These rheostats provide a variable resistance in electrical circuits. Oxidized constantan wire is woun...

View full details
PH1151E

Rheostat - Air Cooled

Useful for a variety of lab. demonstrations. These rheostats provide a variable resistance in electrical circuits. Oxidized constantan wire is woun...

View full details
PH1151D

Rheostat - Air Cooled

Useful for a variety of lab. demonstrations. These rheostats provide a variable resistance in electrical circuits. Oxidized constantan wire is woun...

View full details
PH1151C

Rheostat - Air Cooled

Useful for a variety of lab. demonstrations. These rheostats provide a variable resistance in electrical circuits. Oxidized constantan wire is woun...

View full details
PH1151B

Resistance Investigation Board

A lower cost alternative to above version. This board is much smaller about 42 cm in length and allows to investigate resistance quantitative.A low...

View full details
PH1161E

Resistance Board - Wooden

To investigate the relation between electric resistance and conductor section, length and material. To investigate the relation between electric re...

View full details
PH1161D

Resistance Board - Metal

To investigate the relation between electric resistance and conductor section, length and material. To investigate the relation between electric re...

View full details
PH1161C

Potentiometer One Meter - Two Wire, on Metal base

Mounted on a metal base. Supplied WITH JOCKEY. Potentiometer One Meter - Two Wire, on Metal base

PH1161B

Potentiometer One Meter - Two Wire

Mounted on a polished hardwood baseboard. Supplied WITH JOCKEY. Potentiometer One Meter - Two Wire

PH1160B

Potentiometer One Meter - Single Wire, on Metal base

Mounted on a metal base. Supplied WITH JOCKEY. Comprising 24 SWG constantan wire stretched along a meter scale, subdivided in cm and mm clamped to ...

View full details
PH1161A

Potentiometer One Meter - Single Wire

Mounted on a polished hardwood baseboard. Supplied WITH JOCKEY. Comprising 24 SWG constantan wire stretched along a meter scale, subdivided in cm a...

View full details
PH1160A

Motor - Economy

This open type model is an open type simple motor for demonstration. This open type model is an open type simple motor for demonstration.Operates ...

View full details
PH1228

Molecular Movement Tube

Straight tube filled with glass beads and mercury under high vacuum. Straight tube filled with glass beads and mercury under high vacuum. When heat...

View full details
PH1184

(DISCONTINUED) Mechanical Effect Demonstrator

*** This product is discontinued and is no longer available ***

PH1212

Magnetic Effect Deflection Apparatus - Cathode Ray Tube (Discontinued)

Magnetic Effect Deflection Apparatus consisting of a Cathode Ray Tube mounted to a sturdy base. Used to demonstrate the deviation of cathode rays ...

View full details
PH1216

Jockey

With insulatedhandle, plated brass contact with 4 mm socket terminals.For use with wheatstone bridge and potentiometer, with insulatedhandle, plate...

View full details
PH1162

Induction Coil - 50mm Spark - 11.5" Long, 7" Wide, 6" tall - Eisco Labs

50mm Spark Induction Coil Includes Coil, 2 Spark Rods, Shaker, Reversing Switch, On/Off Button and Power Sockets Provides very high voltages (seve...

View full details
PH1168F

Induction Coil Superior (Discontinued)

This product has been improved and can now be found as part number: PH1168E

PH1169

Hand Crank Generator, 12V DC - With Light Bulb & Lead Binding Posts - Eisco Labs

Hand crank generator can power experiments requiring up to 12V DC Mounted light bulb on the front of generator can be used as flashlight Binding p...

View full details
PH1229HG

Electric Motor Kit, Parts for 6 Motors, Instructions Included - Eisco Labs

Electric motor kits. Contains all the parts required to build 6 model motors. Each kit contains 12 magnets, 6 pieces of armatures, 6 pieces of mild...

View full details
PH1239

Eisco Labs Rheostat - Standard, Resistance 280 Ohms, Max Current 1.2A

This Rheostat is wound with heavily oxidized constantan (Copper-Nickel Alloy) wire on a vitreous enameled steel tube. The tube is supported on die ...

View full details
PH1150J

Eisco Labs Demonstration Motor Generator (AC/DC) - Shunt and Series

Demonstrates both shunt wound, and series wound connections Capable of DC and AC operation Easily dismantled to change the configuration. EISCO De...

View full details
PH1241

EISCO Demonstration DC Electric Motor

Includes: (1) Motor A model of the simplest form of DC electric motor having 2-pole armature wound with enamaled copper wire and a permanent magne...

View full details
PH1238

EISCO Build a DC Motor Kit

Simple science project Helps students learn about electricity, magnetism, and electric motors Learn the DC Motor and its parts from th...

View full details
PH1229

Dynamo - Economical

A 6 V motor, hand driven mounted on base A 6 V motor, hand driven mounted on base. When driven produces a nice glow in bulb.

PH1242D

Demonstration Motor with Newton Color Disc

Large size, mounted on moulded ABS base. Large size, mounted on moulded ABS base. Operates on 6-8 volts DC with Newton's colour disc.

PH1232

Demonstraion Motor Generator Activity Model (DC) - Eisco Labs

Demonstration DC Motor A model of the simplest form of DC electric motor having 2-pole arms wound with enalemd copper wire and a permanent f=A mod...

View full details
PH1242

St. Louis Demonstration Motor, Open Design for Educational Purposes - Eisco Labs

St Louis Motor Generator Open design allows students to observe how each part of the motor operates and functions Mounted on a sturdy base Total d...

View full details
PH1236