Filters
Clamps
-
Eisco Labs Burette/Tube Clamp, Double, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finish This ...
View full detailsCH0258B -
Eisco Labs Burette/Tube Clamp, Single, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finish This ...
View full detailsCH0258A -
Eisco labs Closed Ring Clamp ID 2.5" with Boss head clamp - 5" Long
Cast Iron Ring Clamp with 5/16" diameter stem Open boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from...
View full detailsCH0674B -
Eisco Labs Drop-Forged Steel G-Clamp, 150mm
Drop-forged steel clamp capable of opening 150mm (approximately 6") Threaded steel screw with swivel pads grips material more tightly Sliding T-ba...
View full detailsCH0938E -
Eisco Labs Lab Clamp Holder, Universal, up to 3/4" Rod - Adjusts to Any Angle (Dual 360° Rotation of Bossheads)
All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab...
View full detailsCH0666 -
Eisco Labs Low Friction Force Table Clamp - 2" Pulley
Plastic 2" Pulley Clamp made of hard plastic Clamp max opening 1.250" Grey hand knob for tighting clamp Eisco labs Low Friction Force table 2" Pul...
View full detailsPH0300C -
Eisco Labs Metal Bench Clamp with Pulley with Metal bearing
50 mm diameter pulley Overall length of frame (pulley bar) 110 mm. Maximum clamp opening 25 mm. Metal Clamp with Plastic Pulley Bench clamp pulley...
View full detailsPH0296A -
Eisco Labs Multipurpose Clamp Holder, up to 16mm Rods
Aluminum alloy clamp with plastic clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used on table edges ...
View full detailsCH0663D -
Eisco Labs Plated Spring Steel Wire Test Tube Clamp w Finger Grip
Quality plated steel wire test tube holder Finger grips make use comfortable and secure Self closing clamp for ease of use lightweight, space effi...
View full detailsCH0730 -
Eisco Labs Polypropylene Burette Clamp; Single
Made with Durable Polypropylene Single Clamp Clamp fits rod sizes 10mm and 12.5mm Spring-Loaded Jack Two Tapered Wedges The sturdy, polypropylene ...
View full detailsCH0262A -
Eisco Labs Pulley on Clamp - Metal 25mm Mouth
Clamp made from high quality metal Painted Red Pulley made of high quality plastic Grey hand knob for tightening clamp Clamp has a 45mm plastic pu...
View full detailsPH0301A -
Eisco Labs Retort Clamp - 4-Prong, Powder-Coated
Steel retort clamp measuring approximately 9.75" in length Jaws are lined with cork to protect lab ware, and can open up to 3" in diameter Clamps ...
View full detailsCH0682 -
Eisco Labs Square Boss Head Clamp, Die Cast Alloy, up to 16mm Rods
Die casted alloy clamp with metal clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used to hold flat ar...
View full detailsCH0664 -
Eisco Labs Universal Clamp, Cork Lined Prongs -Holds Objects up to 2.3" [60mm] wide - with Boss Head (Rods up to .59" [15mm] Diameter)
Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 60mm in width 1" cork lined jaws Perfect for test tubes, burettes, ...
View full detailsCH0679AB -
EISCO Large Pulley with Universal Clamp
Clamped onto edge up to 1.5" thick 70mm diameter pulley Includes: (1) Pulley Consists of a 70mm diameter light alloy pulley, held in a...
View full detailsPH0293 -
EISCO Medium Pulley with Universal Clamp
Includes: (1) Pulley Consists of a 50mm diameter light alloy pulley, held in alloy bracket, with two clamping screws for bench and rod support. Th...
View full detailsPH0299 -
EISCO Pendulum Clamp
EISCO Labs Pendulum Clamp This sturdy pendulum clamp is constructed of an aluminum support bar with three screw clamps, attached to a die cast hea...
View full detailsPH0308 -
EISCO Pulley Bench Clamp Fitting, Nylon Ball Bearing
Includes: (1) Bench clamp pulley Comprising a 50 mm diameter nylon ball bearing pulley, carried on a two part aluminium frame, designed primarily ...
View full detailsPH0296B -
EISCO Suspension Clamp - 110mm from Support Rod
Holds items 110mm from the support rod Adjustable and locks at any angle Includes: (1) Suspension Clamp Used to suspend a thermometer ...
View full detailsCH0667 -
EISCO Thermometer Clamp (with Boss Head)
Includes: (1) Thermometer Clamp Adjustable 360° jaw rotation. For attaching to support rods up to 16 mm in diameter. Will accommodates thermometer...
View full detailsCH0667A -
EISCO Universal Clamp, 2 Prong, Cork Lined
Includes: (1) Clamp Two prong, diecasted with other parts of plated brass, accepts articles from 15-60mm diameter actuated by nickel plated brass ...
View full detailsCH0679 -
Filtration Assembly - 1000ml Flask, 300ml Funnel, 47mm Vacuum Base with Sintered Disk and 47mm Clamp - Eisco Labs
Made of high quality Borosilicate glass Includes 4 pieces 1000ml flask, 300ml funnel, 47mm vacuum base with sintered disk and 47mm clamp Designed ...
View full detailsFSAS16 -
Force Sensor Clamp - Pack of 3
These clamps are designed to allow attaching the force sensors to Force Tables . Diameter of mounting rod is 10mm. Sold as a pack of 3.
PH0347FSC -
Force Table, 40cm dia. - Measure Vector Forces - Includes Stand, Pulleys & Clamps, Slotted Masses, String & Hoops
Demonstrate Newton’s First Law and the vector nature of forces Heavy cast base with leveling screws and polymer tabletop Includes force tabletop, ...
View full detailsPH0347CN8