Filters
Lab Equipment & Supplies
-
Double Threaded Base Retort Stand - Sheet Metal Deluxe 200x125mm
Steel base with two tapped holes. Measures 20cm in length, 12.5cm in width and weighs 1200g. Finished in blue color, and fitted with rubber feet fo...
View full detailsCH196002 -
Double Threaded Base Retort Stand - Sheet Metal Deluxe 160x100mm
Steel base with two tapped holes. Measures 16cm in length, 10cm in width and weighs 750g. Finished in blue color, and fitted with rubber feet for e...
View full detailsCH196001 -
G-Clamp, Drop Forged Steel - 200mm (8") Opening Capability - Eisco Labs
Drop Forged Steel G-Clamp 200mm (8") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...
View full detailsCH0938F -
Eisco Labs Drop-Forged Steel G-Clamp, 150mm
Drop-forged steel clamp capable of opening 150mm (approximately 6") Threaded steel screw with swivel pads grips material more tightly Sliding T-ba...
View full detailsCH0938E -
G-Clamp, Drop Forged Steel - 100mm (4") Opening Capability - Eisco Labs
Drop Forged Steel G-Clamp 100mm (4") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...
View full detailsCH0938C -
3 Prong Double Adjustable Universal Retort Clamp with Boss Head, 9" Long, 3.5" Maximum Opening - Eisco Labs
3 Prong Universal Retort Clamp with Boss Head. 9" total length. Jaws open 3.5" wide. Adjustable on both sides with thumbscrews. Commonly used to h...
View full detailsCH0688NC -
Heavy Duty Table Clamp - Vinyl Coated Grip - Rod/Pulley Holder
When you need something held in place, this premium multi-purpose clamp will do just the trick. Can be used for holding rods and pulleys, immobiliz...
View full detailsCH0688FBG -
Rod Clamp - For 10x1.5mm Threaded Rods, Thumbscrew Adjustable
High performance, die casted metal support rod clamp. Tapped hole accommodates a 10x1.5 threaded rod that measures up to 12.5mm in diameter. Design...
View full detailsCH0688G -
Clamp Retort - 3 Prong, Black Powder coated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25...
View full detailsCH0684BLK -
Universal Steel Clamp with Holder - One Flat Jaw, One 'V' Shaped Jaw - Eisco Labs
Durable stamped steel clamp with nearly 1" adjustable holder for a wide variety of rod sizes up to 19mm One flat jaw and one angled jaw for optima...
View full detailsCH0688B -
Swivel Clamp Holder - Screw Adjustable, Tilt Clamps at Any Angle
High performance, jumbo sized, swivel clamp holder made of die-casted metal. This brilliant clamp allows you to tilt clamps at any angle in paralle...
View full detailsCH0688E -
EISCO Clamp Retort, 4 Prong, Cork Lined with Boss Head
Includes: (1) Clamp Diecasted alloy clamp retort, cork lined jaws with bosshead which accommodates rods up to 15 mm dia. Jaw opening 90 mm. This c...
View full detailsCH0687 -
3-Finger Extension Clamp with PVC Coated Prongs & Swivel Bosshead
Die cast alloy construction is strong and corrosion-resistant WIDE JAWS || 3-finger jaws on clamp open to 3.5” (90mm) wide for holding a wide rang...
View full detailsCH0688 -
Burette/Test Tube Clamp with Bosshead - PVC Coated Round Jaws, Opens up to 45mm
Features PVC-dipped steel jaws for firm, no-slip grip on delicate labware Screw adjustable jaws accommodate items measuring from 15mm to 45mm (06"...
View full detailsCH0688A -
Clamp Universal - PVC coated with boss head
PVC coated with boss head. Overall length 27 cm. PVC coated with boss head. Overall length 27 cm.
CH0684E -
Clamp Universal - PVC coated
PVC coated. Overall length 27 cm. PVC coated. Overall length 27 cm.
CH0684D -
Clamp Universal - Cork lined
Cork lined jaws, which accepts articles upto 100 mm in dia. Cork lined jaws, which accepts articles upto 100 mm in diameter. Overall length 27 cm.
CH0684C -
Clamp Retort 3 Prong - Large
Jaws are longer and opening 100 mm. Overall length 25 cm. 3 Prong clamp, a design different than Cat. no. CH0684. Jaws are longer and opening 100 ...
View full detailsCH0684B -
Clamp Retort - 3 Prong, Powder coated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. PVC coated diecast jaw, with clamping tommy-bar scre...
View full detailsCH0684 -
Clamp Retort - 3 Prong, Chrome plated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm
CH0684A -
Clamp Beaker (Discontinued)
For beaker upto 5 ltr, casted alloy with other plated parts, with covered jaws, opening up to 8 cm. The horizontal rod is offset so that large vess...
View full detailsCH0685 -
Universal Retort Clamp - 3 Vinyl Coated Prongs, Double Adjustable
Clamp is designed to hold irregularly shaped items. The three, vinyl coated prongs provide a firm grip. Jaws are adjustable on both sides with thum...
View full detailsCH0688C -
Universal Retort Clamp - 2 Vinyl Coated Prongs, Double Adjustable
This jumbo size, universal clamp is designed to hold a variety of items. The two, vinyl coated jaws provide a firm grip and are adjustable on both ...
View full detailsCH0688D -
Base Retort Stand - Premium Heavy Duty, Cast Iron 21 cm
New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 21 cm; Width - 13.5 cm; Weight - 1600 g
CH0654G -
Base Retort Stand - Premium Heavy Duty, Cast Iron 16 cm
New design with expanded feet. Cast iron, heavy duty, excellent stability. Length - 16 cm; Width - 10 cm; Weight - 900 g
CH0654F -
Rectangular Retort Base & Rod Set - 9"x6" Base, 23.6" Rod - Heavy Duty Cast Iron - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 60cm rod m...
View full detailsCH0653D1RD3 -
Rectangular Retort Base & Rod Set - 6"x4" Base, 19.8" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...
View full detailsCH0653ARD1 -
Rectangular Retort Base & Rod Set - 8"x5" Base, 19.5" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 50cm rod m...
View full detailsCH0653BRD2 -
Rectangular Retort Base & Rod Set - 11"x6" Base, 35.5" Rod - Heavy Duty Cast Iron - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of chemical-resistant cast iron with a blue coating and a 90cm rod m...
View full detailsCH0653E1RD4 -
Rectangular Retort Base & Rod Set - 12.5"x8" Base, 39.5" Rod - Stainless Steel
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 100cm rod ...
View full detailsCH0652DKIT -
Clamp Retort - 4 Prong, Black Powder plated
Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...
View full detailsCH0682BLK -
Bosshead - Economy, with T-pin type screws
Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with T-pin type screws
CH0663ECO