Filters
Lab Equipment & Supplies
-
Clamp Retort - 3 Prong, Powder coated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. PVC coated diecast jaw, with clamping tommy-bar scre...
View full detailsCH0684 -
Clamp Retort - 3 Prong, Chrome plated
PVC coated diecast jaw, with clamping tommy-bar screwthrough swivels, mounted on 13.5 cm rod. of dia. 8 mm jaw capacity 90 mm and overall length 25 cm
CH0684A -
Clamp Beaker (Discontinued)
For beaker upto 5 ltr, casted alloy with other plated parts, with covered jaws, opening up to 8 cm. The horizontal rod is offset so that large vess...
View full detailsCH0685 -
Universal Retort Clamp - 3 Vinyl Coated Prongs, Double Adjustable
Clamp is designed to hold irregularly shaped items. The three, vinyl coated prongs provide a firm grip. Jaws are adjustable on both sides with thum...
View full detailsCH0688C -
Universal Retort Clamp - 2 Vinyl Coated Prongs, Double Adjustable
This jumbo size, universal clamp is designed to hold a variety of items. The two, vinyl coated jaws provide a firm grip and are adjustable on both ...
View full detailsCH0688D -
Clamp Retort - 4 Prong, Black Powder plated
Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...
View full detailsCH0682BLK -
Bosshead - Economy, with T-pin type screws
Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with T-pin type screws
CH0663ECO -
Bosshead - Economy, with metal thumb screw
Die-casted in black finish, accepts rods up to 16 mm dia, at right angle to each other. Bosshead with metal thumb screw
CH0663BK -
Universal Clamp Holder, Jumbo Sized - Holds Rods up 20mm in Diameter
Jumbo sized clamp holder Fits rods 5mm-20mm in diameter Metal thumb screws with grip allows for easy adjustment Universal Clamp Holder, Jumbo Size...
View full detailsCH0664JM -
Ring Support Plate, Steel
Steel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cmSteel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cm in length, finished in grey / ...
View full detailsCH0670 -
Eisco Labs 7.5cm diameter ring with boss head clamp
Made of plated mild steel Inner diameter is 7.5 cm Ring and rod are integrated with boss head clamp From vertical rod connecting point to end of r...
View full detailsCH0672B -
Eisco labs 3.875" Diameter Closed ring with Boss head clamp.
Outside diameter of ring 3.625" - Plated mild steel Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter ...
View full detailsCH0672C -
Eisco labs 2.5" Diameter Closed ring with Boss head clamp.
Outside diameter of ring 2.5" - Plated mild steel Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter wi...
View full detailsCH0672A -
Retort Ring, Closed - 3" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3" Stem measures 5.5" in length Rod diameter measure 0.25" Total...
View full detailsCH0668B -
Retort Ring, Closed - 2" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 2" Stem measures 5.5" in length Rod diameter measure 0.25" Total...
View full detailsCH0668A -
Retort Ring, Closed - 5.9" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 5.9" Rod diameter measure 0.25" Total length measures 12" Closed...
View full detailsCH0668D -
Retort Ring, Closed - 3.9" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3.9" Stem measures 5.5" in length Total length measures 10" Closed ...
View full detailsCH0668C -
12PK Lattice Support Clamps - Fits Rods Up To 12.5mm diameter - Eisco Labs
FITS 12.5mm RODS || Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH || Clamps are made of high q...
View full detailsCH0664C -
Eisco Labs Universal Clamp, Cork Lined Prongs -Holds Objects up to 2.3" [60mm] wide - with Boss Head (Rods up to .59" [15mm] Diameter)
Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 60mm in width 1" cork lined jaws Perfect for test tubes, burettes, ...
View full detailsCH0679AB -
EISCO Universal Clamp, 2 Prong, Cork Lined
Includes: (1) Clamp Two prong, diecasted with other parts of plated brass, accepts articles from 15-60mm diameter actuated by nickel plated brass ...
View full detailsCH0679 -
EISCO Thermometer Clamp (with Boss Head)
Includes: (1) Thermometer Clamp Adjustable 360° jaw rotation. For attaching to support rods up to 16 mm in diameter. Will accommodates thermometer...
View full detailsCH0667A -
EISCO Suspension Clamp - 110mm from Support Rod
Holds items 110mm from the support rod Adjustable and locks at any angle Includes: (1) Suspension Clamp Used to suspend a thermometer ...
View full detailsCH0667 -
Eisco Labs Multipurpose Clamp Holder, up to 16mm Rods
Aluminum alloy clamp with plastic clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used on table edges ...
View full detailsCH0663D -
Eisco Labs Heavy Duty Boss Head, Chrome Plated, Fits Rods up to 20mm Diameter
Heavy duty bosshead Die casted alloy with chrome plated finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs ...
View full detailsCH0665A -
Eisco Labs Heavy Duty Boss Head, Black Coated, Fits Rods up to 20mm Diameter
Heavy duty bosshead Die casted alloy with black coat finish Accepts rods measuring up to 20mm in diameter Large thumb screws and grooved knobs for...
View full detailsCH0665B -
Eisco Labs Square Boss Head Clamp, Die Cast Alloy, up to 16mm Rods
Die casted alloy clamp with metal clamping screws Accommodates both square and round rods up to 16mm in thickness Can also be used to hold flat ar...
View full detailsCH0664 -
EISCO Boss Head, Die Cast Alloy, up to 16mm Rods
EISCO Boss Head, Die Cast Alloy, rods up to 16mm Includes: (1) Boss head For use with laboratory stands, this popular boss head is made of die c...
View full detailsCH0663B -
Eisco Labs Boss Head Clamp, Die Cast Alloy, up to 16mm Rods
Aluminum alloy clamp Metal clamping screws with plastic heads Accommodates round rods up to 16mm in diameter EISCO Boss Head, Die Cast Alloy, rods...
View full detailsCH0663AP -
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish, rods up to 16mm Includes: (1) Boss head For use with laboratory stands, this popular boss...
View full detailsCH0663A -
Eisco Labs Retort Clamp - 4-Prong, Powder-Coated
Steel retort clamp measuring approximately 9.75" in length Jaws are lined with cork to protect lab ware, and can open up to 3" in diameter Clamps ...
View full detailsCH0682 -
Clamp Retort - 4 Prong, Chrome plated
Diecast in alloy, with other parts of plated brass, clamp accepts articles from 2-90 mm diameters . The design of the jaw ensures a firm grip at al...
View full detailsCH0682A -
Channel Base
For holding flat objects upto 18 mm thick. Size 10 cm length and 8 cm width. Cast metal, finished in acid resisting paint. Fitted with thumb screw...
View full detailsCH0661 -
Eisco labs Closed Ring Clamp ID 2.5" with Boss head clamp - 5" Long
Cast Iron Ring Clamp with 5/16" diameter stem Open boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from...
View full detailsCH0674B -
Eisco Labs 2.125" diameter Cast Iron Closed Ring Clamp with Boss Head
Eisco Labs 2.125" diameter Cast Iron Closed Ring Clamp with Boss Head Boss head fitted with thumb-screw to accept rods 1/2"" dia Extension distanc...
View full detailsCH0674A -
Eisco Labs 6" diameter Cast Iron Closed Ring Clamp with Boss Head
6" Out side diameter cast Iron 5/16" diameter Ring with Boss Head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Ex...
View full detailsCH0674E -
Cast Iron Ring, 5.75" (5.125" Inner Dia.) - Open Boss Head Clamp, with Thumb Screw - Eisco Labs
5.75" cast iron ring with boss head clamp Boss head fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension distance from boss hea...
View full detailsCH0674D -
Ring Support, Closed, 4" Inner Diameter - Cast Iron - Eisco Labs
4" inside diameter cast Iron 5/16" diameter Ring with integral screw clamp Fitted with thumb-screw to accept rods from 5/16" to 5/8" dia Extension...
View full detailsCH0674C -
Eisco Labs Boss Head two sided, Painted Die Cast Alloy, up to 19mm Rods
This heavy duty boss head is die casted alloy that has been painted gray. It has 2 metal adjustable metal thumb screws accepts rods up to 19mm in ...
View full detailsCH0663C -
Boss Head - Mini
Diecasted alloy, accepts rod upto 13 mm dia. For use with laboratory stand, diecasted alloy, accepts rod upto 13 mm diameter, which are secured wi...
View full detailsCH0662 -
Eisco Labs Lab Clamp Holder, Universal, up to 3/4" Rod - Adjusts to Any Angle (Dual 360° Rotation of Bossheads)
All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab...
View full detailsCH0666 -
Boss Head - Aluminium
Aluminium die casted, holds rods at right angle with metal head thumbscrews can take rods up to 16 mm dia.
CH0664A -
Base Slotted
Cast metal, finished in acid resisting paint with jaws 40 mm height and fitted thumb screw. Cast metal, finished in acid resisting paint with jaw...
View full detailsCH0660 -
3 Prong Double Adjustable Universal Clamp, with integral bosshead
These clamps are used to hold irregularly shaped items. They provide firm grip to most commonly used glassware items in the labs. The jaws are adju...
View full detailsCH0676B -
3 Prong Double Adjustable Universal Clamp, Non-Slip Vinyl Coated Rubber Jaws, 10" Overall Length - Eisco Labs
3 Prong Adjustable Universal Clamp with a 10" overall length and 0.375 diameter rod Perfect for holding both regular and irregular shaped glasswar...
View full detailsCH0676A -
2-Prong Adjustable Clamp - Can Hold Objects of 8-30mm in Diameter - Integral Bosshead - Vinyl Coated, Nonslip Jaws - Eisco Labs
Two prong, adjustable clamp Integral bosshead Universal- clamp is ideal for use with straight sided glassware and apparatus such as burettes, tube...
View full detailsCH0680A -
2 Prong Single Adjustable Universal Clamp - Small
This clamp is ideal for use with straight sides glassware and apparatus such as burettes, tubes & flask necks. The jaws are coated with nonslip...
View full detailsCH0680 -
2 Prong Single Adjustable Universal Clamp - Large, with integral bosshead
This clamp with bosshead is ideal for use with straight sides glassware and apparatus such as burettes, tubes & flask necks. The jaws are coate...
View full detailsCH0681B -
2 Prong Single Adjustable Universal Clamp - Large
This clamp is ideal for use with straight sides glassware and apparatus such as burets, tubes & flask necks. The jaws are coated with non-slip ...
View full detailsCH0681A