Filters
Metal Labware
-
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish
EISCO Boss Head, Die Cast Alloy, Powder Coated Finish, rods up to 16mm Includes: (1) Boss head For use with laboratory stands, this popular boss...
View full detailsCH0663A -
Channel Base
For holding flat objects upto 18 mm thick. Size 10 cm length and 8 cm width. Cast metal, finished in acid resisting paint. Fitted with thumb screw...
View full detailsCH0661 -
Rectangular Double Burette Base - 13"x7" - Heavy Duty Cast Iron, Blue - Eisco Labs
HIGH QUALITY || Rectangular double burette base made of chemical-resistant cast iron with a blue coating STABILITY || The 13" long by 7" wide base...
View full detailsCH0656A -
Eisco Labs Burette/Tube Clamp, Single, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finish This ...
View full detailsCH0258A -
Eisco Labs Burette/Tube Clamp, Double, High Strength Alloy - Spring Loaded Jaws - 7/8" Width Capacity, Max 16mm Dia. Rod
Spring loaded, high strength alloy jaws holds objects in place Holds objects up to 7/8" Width/Diameter Powder coated for long lasting finish This ...
View full detailsCH0258B -
Eisco Labs Burette Clamp, Double, Casted
Casted, with built-in boss head Approximately 3.75" tall, 4.5" wide and 2.75" long Approximately 3.75" tall, 4.5" wide and 2.75" long Approximatel...
View full detailsCH0256B -
Burette Clamp, with Built in Boss Head - Accommodates Single Burette of up to 20mm Dia. - Die Pressed Sheet Metal, Vinyl Covered Fingers - Eisco Labs (Discontinued)
Burette clamp with built in boss head Can accommodate burettes measuring up to 20mm (0.78") in diameter Can be mounted on rod measuring up to 10mm...
View full detailsCH0254A -
Burette Clamp - Single, Casted
Single burette clamp made from cast metal, includes a built in boss head. It can accommodate 1 burette up to 20 mm in diameter and can be mounted ...
View full detailsCH0256A -
Burette Clamp - Double, sheet metal
Sheet metal, die-pressed, with built-in boss head.To hold two burettes, sheet metal, die-pressed, with built-in boss head.
CH0254B -
Eisco Labs Boss Head two sided, Painted Die Cast Alloy, up to 19mm Rods
This heavy duty boss head is die casted alloy that has been painted gray. It has 2 metal adjustable metal thumb screws accepts rods up to 19mm in ...
View full detailsCH0663C -
Boss Head - Mini
Diecasted alloy, accepts rod upto 13 mm dia. For use with laboratory stand, diecasted alloy, accepts rod upto 13 mm diameter, which are secured wi...
View full detailsCH0662 -
Eisco Labs Lab Clamp Holder, Universal, up to 3/4" Rod - Adjusts to Any Angle (Dual 360° Rotation of Bossheads)
All metal material Accepts rods up to 3/4" in diameter Center adjusts to allow for different angles other than perpendicular Perfect universal lab...
View full detailsCH0666 -
Boss Head - Aluminium
Aluminium die casted, holds rods at right angle with metal head thumbscrews can take rods up to 16 mm dia.
CH0664A -
Base Slotted
Cast metal, finished in acid resisting paint with jaws 40 mm height and fitted thumb screw. Cast metal, finished in acid resisting paint with jaw...
View full detailsCH0660 -
Triangular Tripod Retort Base - 4"x4" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || Triangular Tripod Retort Base made of chemical-resistant cast iron with a black coating STABILITY || The 4" long by 4" wide 3-poin...
View full detailsCH0648A -
Triangular Tripod Retort Base - 5.25"x5.25" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || Triangular Tripod Retort Base made of chemical-resistant cast iron with a black coating STABILITY || The 5.25" long by 5.25" wide ...
View full detailsCH0648B -
Triangular Tripod Retort Base - 6"x6" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || Triangular Tripod Retort Base made of chemical-resistant cast iron with a black coating STABILITY || The 6" long by 6" wide 3-poin...
View full detailsCH0648C -
Rectangular Retort Base - 10"x6" - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel - Features rubber strips to protect surfaces STAB...
View full detailsCH0649C -
Rectangular Retort Base - 6.5"x4" - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel - Features rubber strips to protect surfaces STAB...
View full detailsCH0649A -
Rectangular Retort Base, 12.5"x8" - Two Perpendicular Threaded Holes for Rods - Heavy Duty, Corrosion Resistant Steel
Rectangular retort base made of corrosion-resistant, powder-coated pressed steel STABILITY || The 12.5" long by 8" wide base weighs 4lbs, providin...
View full detailsCH0652D -
Retort Base - 10"x6.25" - High Quality Steel, Powder Coated
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 10" long by 6.25" wide base weig...
View full detailsCH0652C -
Retort Base - 8"x5" - High Quality Steel, Powder Coated
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 8" long by 5" wide base weighs 1...
View full detailsCH0652B -
Retort Base - 6.3"x4" - High Quality Steel, Powder Coated
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 6.3" long by 4" wide base weighs...
View full detailsCH0652A -
Rectangular Retort Base - 10"x6" Base - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 10" long by 6" wide base weighs ...
View full detailsCH0653C -
Rectangular Retort Base - 8"x5.25" Base - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of corrosion-resistant, powder-coated pressed steel STABILITY || The 8" long by 5.25" wide base weigh...
View full detailsCH0653B -
Rectangular Retort Base - 5.75"x3.75" Base - Heavy Duty Cast Iron - Eisco Labs
HIGH QUALITY || Rectangular retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 5.75" long by 3.75" wide base we...
View full detailsCH0653A -
H-Shaped Retort Base - 8"x8" Base - Heavy Duty Cast Iron, Blue - Eisco Labs
HIGH QUALITY || H-shaped frame retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 8" long by 8" wide 4-point ba...
View full detailsCH0656 -
A-Frame Retort Base - 12"x11.5" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || A-shaped frame retort base made of chemical-resistant cast iron with a black coating STABILITY || The 12" long by 11.5" wide 3-poi...
View full detailsCH0655B -
A-Frame Retort Base - 10"x10" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || A-shaped frame retort base made of chemical-resistant cast iron with a black coating STABILITY || The 10" long by 10" wide 3-point...
View full detailsCH0655C -
A-Frame Retort Base - 10"x11" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || A-shaped frame retort base made of chemical-resistant cast iron with a black coating STABILITY || The 10" long by 11" wide 3-point...
View full detailsCH0655A -
A-Frame Retort Base - 8"x8" Base - Heavy Duty Cast Iron, Blue - Eisco Labs
HIGH QUALITY || A-shaped frame retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 8" long by 8" wide 3-point ba...
View full detailsCH0655 -
Rectangular Retort Base - 9"x6" Base - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 9" long by 5.5" wide base weighs...
View full detailsCH0656C -
Rectangular Retort Base - 6"x4" Base - Heavy Duty, Corrosion Resistant Steel - Eisco Labs
HIGH QUALITY || Rectangular retort base made of corrosion resistant, powder coated pressed steel STABILITY || The 6" long by 4" wide base weighs 1...
View full detailsCH0656B -
Rectangular Retort Base - 10"x6" Base - Heavy Duty Cast Iron, Blue - Eisco Labs
HIGH QUALITY || Rectangular retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 10" long by 6" wide base weighs ...
View full detailsCH0654B -
Rectangular Retort Base - 8"x5" - Heavy Duty Cast Iron, Blue - Eisco Labs
HIGH QUALITY || Rectangular retort base made of chemical-resistant cast iron with a blue coating STABILITY || The 8" long by 5" wide base weighs 3...
View full detailsCH0654A -
Aluminum Rod, 29.5" (75cm) - 10 x 1.5mm Thread
Laboratory Aluminum Rod, 29.5"Lab stands and rods are used in every area of science - especially chemistry, for holding and manipulating an experim...
View full detailsCH0658C