Filters
Newest Products
-
Tripod Stand - Triangular, S.Steel
Height 20 cm and length of side 12.5 cm. Stainless Steel, height 20 cm and length of side 12.5 cm.
CH0646A -
Tripod Stand - Triangular, 15cm.
Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs. Length of side 15cm, height 21cm.
CH0645B -
Tripod Stand - Triangular, 12cm
Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs. Length of side 12cm, height 21cm.
CH0645A -
Tripod Stand - Circular, 15cm. Dia
Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs.OD 15cm, height 21cm.
CH0644B -
Tripod Stand - Circular, 12cm. Dia
Zinc plated cast iron top and mild steel legs. Zinc plated cast iron top and mild steel legs.OD 12cm, height 21cm.
CH0644A -
Tripod Stand - Circular
Height 110 mm inner dia. 95 mm. Used with spirit lamps. Sheet top, black colour. Height 110 mm inner dia. 95 mm. Used with spirit lamps. Supplied...
View full detailsCH0643 -
T-Shaped Nesting Support Base - 10.5"x9" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || T-shaped nesting support retort base made of chemical-resistant cast iron with a black coating STABILITY || The 10.5" long by 9" w...
View full detailsCH0656H -
T-Shaped Nesting Support Base - 8.5"x7.5" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || T-shaped nesting support retort base made of chemical-resistant cast iron with a black coating STABILITY || The 8.5" long by 7.5" ...
View full detailsCH0656G -
Swivel Clamp Holder - Screw Adjustable, Tilt Clamps at Any Angle
High performance, jumbo sized, swivel clamp holder made of die-casted metal. This brilliant clamp allows you to tilt clamps at any angle in paralle...
View full detailsCH0688E -
Rectangular Retort Base & Rod Set, Superior - 8"x5" Base, 23.6" Rod - Heavy Duty, Corrosion Resistant Steel - 12mm Diameter Rod - Eisco Labs
HIGH QUALITY || Rod and base set consisting of a rectangular retort base made of corrosion-resistant, powder-coated pressed steel and a 60cm rod m...
View full detailsSTDRD1 -
Stump Base - 2.3" Base - Heavy Duty Cast Iron, Black - Eisco Labs
HIGH QUALITY || Stump-shaped support retort base made of chemical-resistant cast iron with a black coating STABILITY || It's base is 2.3" wide and...
View full detailsCH0656J -
Retort Stand Rod, 29.5" (75cm) - Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 75cm rod made of high quality steel STABILITY || Rod measures 29.5" tall and 12mm in diameter- Provides superb stability for exper...
View full detailsCH0657C -
Retort Stand Rod, 23.6" (60cm) - Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 60cm rod made of high quality steel STABILITY || Rod measures 23.6" tall and 12mm in diameter- Provides superb stability for exper...
View full detailsCH0657B -
Retort Stand Rod, 19.8" (50cm) - Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 50cm rod made of high quality steel STABILITY || Rod measures 19.8" tall and 12mm in diameter- Provides superb stability for exper...
View full detailsCH0657A -
Retort Stand Rod, 39.5" (100cm) - Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 100cm rod made of high quality steel STABILITY || Rod measures 39.5" tall and 12mm in diameter- Provides superb stability for expe...
View full detailsCH0657D -
Stand Tripod - Circular, 80mm dia
Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 80mm, height 210mm
CH0647C -
Stand Tripod - Circular, 22cm height
Stainless Steel, polished, circular, with base Stainless Steel, polished, height 22 cm and inner dia 6.5 cm.
CH0647B -
Stand Tripod - Circular, 120mm dia
Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 120mm, height 210mm
CH0647E -
Stand Tripod - Circular, 100mm dia
Made of Steel wire, Round form, nickel plated. Made of Steel wire, Round form, nickel plated. Ring OD 100mm, height 210mm
CH0647D -
Stand for Alcohol Burner - Chrome Plated Steel Wire - 3.5"L x 3.5"W x 3.5"H
Made from chrome-plated steel wire that evenly disperses heat Heavy gauge wire mesh screen and stable base easily supports heavy glassware and cer...
View full detailsCH0643A -
Retort Stand Rod, 29.5" (75cm) - Stainless Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 75cm rod made of high quality stainless steel STABILITY || Rod measures 29.5" tall and 12mm in diameter- Provides superb stability...
View full detailsCH0659C -
Retort Stand Rod, 23.6" (60cm) - Stainless Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 60cm rod made of high quality stainless steel STABILITY || Rod measures 23.6" tall and 12mm in diameter - Provides superb stabilit...
View full detailsCH0659B -
Retort Stand Rod, 19.8" (50cm) - Stainless Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 50cm rod made of high quality stainless steel STABILITY || Rod measures 19.8" tall and 12mm in diameter - Provides superb stabilit...
View full detailsCH0659A -
Retort Stand Rod, 39.5" (100cm) - Stainless Steel - 10 x 1.5mm Thread - Eisco Labs
HIGH QUALITY || 100cm rod made of high quality stainless steel STABILITY || Rod measures 39.5" tall and 12mm in diameter- Provides superb stabilit...
View full detailsCH0659D -
Ring Support Plate, Steel
Steel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cmSteel, 10 cm dia. in steel with 8 mm dia. stem and 12.5 cm in length, finished in grey / ...
View full detailsCH0670 -
Eisco Labs 7.5cm diameter ring with boss head clamp
Made of plated mild steel Inner diameter is 7.5 cm Ring and rod are integrated with boss head clamp From vertical rod connecting point to end of r...
View full detailsCH0672B -
Eisco labs 3.875" Diameter Closed ring with Boss head clamp.
Outside diameter of ring 3.625" - Plated mild steel Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter ...
View full detailsCH0672C -
Eisco labs 2.5" Diameter Closed ring with Boss head clamp.
Outside diameter of ring 2.5" - Plated mild steel Ring and rod are integrated with boss head clamp Boss head clamps rods up to 5/8" in diameter wi...
View full detailsCH0672A -
Retort Ring, Closed - 3" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3" Stem measures 5.5" in length Rod diameter measure 0.25" Total...
View full detailsCH0668B -
Retort Ring, Closed - 2" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 2" Stem measures 5.5" in length Rod diameter measure 0.25" Total...
View full detailsCH0668A -
Retort Ring, Closed - 5.9" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 5.9" Rod diameter measure 0.25" Total length measures 12" Closed...
View full detailsCH0668D -
Retort Ring, Closed - 3.9" I.D. with 5.5" Stem - Plated Mild Steel
Closed Retort Ring made from plated mild steel Inner diameter of ring measures 3.9" Stem measures 5.5" in length Total length measures 10" Closed ...
View full detailsCH0668C -
13 Piece Set - Complete Research Grade Lab Starter Kit - Includes Rod, Base, Tongs, Rings, Test Tube Stands, Clamps & More - Eisco Labs
RESEARCH QUALITY || This ultimate laboratory starter set includes a rod, base, tong, stand, clamp and more COMPLETE KIT || Test tube/lab instrumen...
View full detailsLABKIT -
12PK Lattice Support Clamps - Fits Rods Up To 12.5mm diameter - Eisco Labs
FITS 12.5mm RODS || Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH || Clamps are made of high q...
View full detailsCH0664C -
Heavy Duty Laboratory Scissor Jack - Steel Platform 6" by 5"- Max Height 9 5/8", Min Height 2 1/2" - Maximum Stable Weight 55lbs
Strong, stable support for lab equipment 6" by 5" area Maximum height is 9 5/8", minimum is 2 1/2" Heavy duty - maximum stable load is 55lbs Powde...
View full detailsCH0642A -
Laboratory and Fabrication Scissor Jack, Extendable with Hand Crank - Full Extension: 10.5 Inches - Rust-Resistant Aluminum - Premium Quality - Eisco Labs
EXTENDABLE || Adjustable and reversible lab jack with stainless steel operating screw and 10mm tapped hole for accepting retort rod - Easy, fluid ...
View full detailsCH0642C -
Scissor Jack Laboratory Stand with 7.75 in x 7.75 in Plate, Fully Extended Height 12 in - Eisco Labs
Durable powder coated steel laboratory scissor jack, with 25kg (55 lbs.) maximum load Plate size 7.75 in x 7.75 in Platform minimum height is 2.5 ...
View full detailsCH0642B -
G-Clamp, Drop Forged Steel - 200mm (8") Opening Capability - Eisco Labs
Drop Forged Steel G-Clamp 200mm (8") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...
View full detailsCH0938F -
Eisco Labs Drop-Forged Steel G-Clamp, 150mm
Drop-forged steel clamp capable of opening 150mm (approximately 6") Threaded steel screw with swivel pads grips material more tightly Sliding T-ba...
View full detailsCH0938E -
G-Clamp, Drop Forged Steel - 100mm (4") Opening Capability - Eisco Labs
Drop Forged Steel G-Clamp 100mm (4") Opening Capacity Use for woodworking, fabrication, apparatus setup, and even for lessons on pressure and torq...
View full detailsCH0938C -
Eisco Labs Universal Clamp, Cork Lined Prongs -Holds Objects up to 2.3" [60mm] wide - with Boss Head (Rods up to .59" [15mm] Diameter)
Boss head holds rods up to 15mm in diameter Adjustable jaws hold objects up to 60mm in width 1" cork lined jaws Perfect for test tubes, burettes, ...
View full detailsCH0679AB -
EISCO Universal Clamp, 2 Prong, Cork Lined
Includes: (1) Clamp Two prong, diecasted with other parts of plated brass, accepts articles from 15-60mm diameter actuated by nickel plated brass ...
View full detailsCH0679 -
EISCO Thermometer Clamp (with Boss Head)
Includes: (1) Thermometer Clamp Adjustable 360° jaw rotation. For attaching to support rods up to 16 mm in diameter. Will accommodates thermometer...
View full detailsCH0667A -
EISCO Suspension Clamp - 110mm from Support Rod
Holds items 110mm from the support rod Adjustable and locks at any angle Includes: (1) Suspension Clamp Used to suspend a thermometer ...
View full detailsCH0667